• wastewater treatment of palm oil mill effluent (pome)

    Wastewater Treatment of Palm Oil Mill Effluent (POME)

    The application of membrane separation technology coupled with adsorption treatment (pre-treatment) can be effective means of treating palm oil mill effluent (POME).The pre-treatment process was done by stirring the raw palm oil mill effluent (POME) with 0.20 g/L of palm kernel shell-based activated carbon (PKS-AC) in 35.94 min with stirring speed 39.82 rpm and able to reduce 71.26% of

  • (pdf) treatment of palm oil mill effluent (pome) using

    (PDF) Treatment of Palm Oil Mill Effluent (POME) using

    PDF | On Dec 7, 2019, M S Hybat and others published Treatment of Palm Oil Mill Effluent (POME) using Membrane Anaerobic System (MAS) | Find, read and cite all the research you need on ResearchGate

  • water recycling from palm oil mill effluent (pome) using

    Water Recycling from Palm Oil Mill Effluent (POME) Using

    Request PDF | Water Recycling from Palm Oil Mill Effluent (POME) Using Membrane Technology | Malaysia is the largest producer and exporter of palm oil. Palm oil processing is carried out in palm

  • (pdf) treatment of palm oil mill effluent using combination

    (PDF) Treatment of Palm Oil Mill Effluent Using Combination

    The treatment performance of palm oil mill effluent (POME) using a laboratory-scale moving bed biofilm reactor (MBBR) was investigated. Two types of biofilm carriers were used to fill the MBBR

  • membrane ultrafiltration of treated palm oil mill effluent (pome)

    Membrane ultrafiltration of treated Palm Oil Mill Effluent (POME)

    This study evaluate the performance of ultrafiltration UF membrane system in the treatment of biologically treated palm oil mill effluent (POME) by varying the effects of transmembrane pressure

  • (pdf) treatment of palm oil mill effluent using membrane

    (PDF) Treatment of Palm Oil Mill Effluent Using Membrane

    Over the years, different types of alternative technologies have been developed and used for palm oil mill effluent (POME) treatment. Specifically, membrane bioreactor (MBR) has been employed to relegate pollutants contained in POME under different

  • water recycling from palm oil mill effluent (pome) using

    Water recycling from palm oil mill effluent (POME) using

    Large quantities of water are used during the extraction of crude palm oil from the fresh fruit bunch, and about 50% of the water results in palm oil mill effluent (POME). POME is a thick brownish liquid that contains high amounts of total solids (40,500 mg/L), oil and grease (4000 rag/L), COD (50,000 mg/L) and BOD (25,000 mg/L).

  • pre-treatment and membrane ultrafiltration using treated palm

    Pre-treatment and membrane ultrafiltration using treated palm

    Vol. 24 (Suppl.) 2002 : Membrane Sci. &Tech. Palm oil mill effluent (POME) 893 Wong, P.W., et al. duce higher quality effluent is through the use of membrane technology at the tertiary treatment stage. Membrane treatment is capable of provid-ing a highly efficient treatment, requires minimal energy, and does not introduce any additives to the

  • membrane ultrafiltration of treated palm oil mill effluent (pome)

    Membrane ultrafiltration of treated Palm Oil Mill Effluent (POME)

    This study evaluate the performance of ultrafiltration UF membrane system in the treatment of biologically treated palm oil mill effluent (POME) by varying the effects of transmembrane pressure

  • tertiary treatment of biologically treated palm oil mill

    Tertiary Treatment of Biologically Treated Palm Oil Mill

    This study evaluate the performance of ultrafiltration UF membrane system in the treatment of biologically treated palm oil mill effluent (POME) by varying the effects of transmembrane pressure and using different molecular weight cut-off (MWCO). Flat sheet polyethersulfone (PES) ultrafiltration membrane of molecular weight cut-off (MWCO) 1 kDa

  • treatment of palm oil mill effluent (pome) using membrane

    TREATMENT OF PALM OIL MILL EFFLUENT (POME) USING MEMBRANE

    Abd. Aziz et al: TREATMENT OF PALM OIL MILL EFFLUENT (POME) USING MEMBRANE BIOREACTOR 464 Introduction The history of palm oil can be traced back to the days of the Egyptian paraohs 5000 years B.C. It was introduced to Malaysia at the start of the 20th century and commercially produced in 1917. Palm oil's unique composition makes it

  • pre-treatment and membrane ultrafiltration using treated palm

    Pre-treatment and membrane ultrafiltration using treated palm

    Vol. 24 (Suppl.) 2002 : Membrane Sci. &Tech. Palm oil mill effluent (POME) 893 Wong, P.W., et al. duce higher quality effluent is through the use of membrane technology at the tertiary treatment stage. Membrane treatment is capable of provid-ing a highly efficient treatment, requires minimal energy, and does not introduce any additives to the

  • palm oil mill effluent (pome) treatment and bioresources

    Palm oil mill effluent (POME) treatment and bioresources

    An attempt was made to examine the effect of applied pressure on membrane fouling that might influence the potential use of ultrafiltration (UF) membrane in treating as well as recovering the bioresources, namely protein and carbohydrate from complex feed like palm oil mill effluent (POME).

  • treatability of palm oil mill effluent (pome) using black

    TREATABILITY OF PALM OIL MILL EFFLUENT (POME) USING BLACK

    4.1 Characteristics of palm oil mill effluent (POME) (n = 2) 49 4.2 Percentage of COD removal of the effluent from various reactors during degradation process from 0 to 10 days 57 4.3 Probability value denotes the significant differences among pH, temperature and treatment time on COD and volatile solids

  • water recycling from palm oil mill effluent (pome) using

    Water recycling from palm oil mill effluent (POME) using

    Large quantities of water are used during the extraction of crude palm oil from the fresh fruit bunch, and about 50% of the water results in palm oil mill effluent (POME). POME is a thick brownish liquid that contains high amounts of total solids (40,500 mg/L), oil and grease (4000 mg/L), COD (50,000 mg/L) and BOD (25,000 mg/L).

  • production of methane from palm oil mill effluent by using

    PRODUCTION OF METHANE FROM PALM OIL MILL EFFLUENT BY USING

    December 2009. Malaysian palm oil production is expected to reach 18 million tonnes in 2010.Hence, the amount of effluents that produce is escalating, and the waste resources would never be the limitation. In the process of palm oil milling, Palm Oil Mill Effluent (POME) is produced

  • treatment of palm oil mill effluent (pome) using membrane

    TREATMENT OF PALM OIL MILL EFFLUENT (POME) USING MEMBRANE

    Abd. Aziz et al: TREATMENT OF PALM OIL MILL EFFLUENT (POME) USING MEMBRANE BIOREACTOR 464 Introduction The history of palm oil can be traced back to the days of the Egyptian paraohs 5000 years B.C. It was introduced to Malaysia at the start of the 20th century and commercially produced in 1917. Palm oil's unique composition makes it

  • water recycling from palm oil mill effluent (pome) using

    Water recycling from palm oil mill effluent (POME) using

    Large quantities of water are used during the extraction of crude palm oil from the fresh fruit bunch, and about 50% of the water results in palm oil mill effluent (POME). POME is a thick brownish liquid that contains high amounts of total solids (40,500 mg/L), oil and grease (4000 mg/L), COD (50,000 mg/L) and BOD (25,000 mg/L).

  • treatment of palm oil mill effluent (pome) using membrane

    Treatment of Palm Oil Mill Effluent (POME) using membrane

    mill, diagrammatically described in Figure 1, produces about 2.5 m3 of effluent for every tonne of palm oil produced. In 1992, Malaysia produced about 6.7 million tonnes of crude palm oil contributing to 15.9 million cubic metres of palm oil mill effluent (POME) [3]. Raw POME has a high biochemical oxygen demand (BOD)

  • membrane bioreactor technology for tertiary treatment of palm

    MEMBRANE BIOREACTOR TECHNOLOGY FOR TERTIARY TREATMENT OF PALM

    osmosis treatment to potable water. COST OF THE SYSTEM The total cost of an MBR plant for tertiary treat-ment of palm oil mill effluent is about RM 2.3 mil-lion for a typical 40 t FFB hr-1 palm oil mill. The membrane element is guaranteed for five years. Figure 2. MBR pilot plant in POMTEC.

  • production of methane from palm oil mill effluent by using

    PRODUCTION OF METHANE FROM PALM OIL MILL EFFLUENT BY USING

    December 2009. Malaysian palm oil production is expected to reach 18 million tonnes in 2010.Hence, the amount of effluents that produce is escalating, and the waste resources would never be the limitation. In the process of palm oil milling, Palm Oil Mill Effluent (POME) is produced

  • palm oil mill effluent (pome) characteristic in high crop

    Palm Oil Mill Effluent (POME) Characteristic in High Crop

    Palm oil mill effluent (POME) is a wastewater generated from palm oil milling activities which requires effective treatment before discharge into watercourses due to its highly polluting properties. The characterization of wastewater is the essential step in the design of any wastewater treatment plant (WWTP) in the industry as conducting pilot-scale tests to obtain design and operating

  • pretreatment of palm oil mill effluent for water reclamation

    PRETREATMENT OF PALM OIL MILL EFFLUENT FOR WATER RECLAMATION

    Pre-Treatment of Palm Oil Mill Effluent (POME): A Comparison Study Using Chitosan and Alum. Malaysian Journal of Civil Engineering 19(2) : 38-51 [6]. Kongnoo, A., Suksaroj, T., Intharapat, P., Promtong, T. and Suksaroj, C. (2011). Decolorization and Organic Removal from Palm Oil Mill Effluent by Fenton’s Process.

  • anaerobic treatment of palm oil mill effluent in pilot-scale

    Anaerobic Treatment of Palm Oil Mill Effluent in Pilot-Scale

    Large quantity of water is required during the extraction process; consequently, the palm oil production generates huge quantity of palm oil mill effluent (POME). It is estimated that about 0.75 m 3 of POME is generated when 1 ton of fresh fruit bunch (FFB) is processed . POME is a concentrated yellow liquid with a distinct offensive odor and

  • membrane bioreactor technology for tertiary treatment of palm

    MEMBRANE BIOREACTOR TECHNOLOGY FOR TERTIARY TREATMENT OF PALM

    osmosis treatment to potable water. COST OF THE SYSTEM The total cost of an MBR plant for tertiary treat-ment of palm oil mill effluent is about RM 2.3 mil-lion for a typical 40 t FFB hr-1 palm oil mill. The membrane element is guaranteed for five years. Figure 2. MBR pilot plant in POMTEC.

  • treatment of palm oil mill effluent (pome) using membrane

    Treatment of palm oil mill effluent (POME) using membrane

    Abdul Aziz, Mohd Azoddein and Hazlan, Haris and Faten Ahada, Mohd Azli (2015) Treatment of palm oil mill effluent (POME) using membrane bioreactor. Malaysian Journal of Analytical Sciences, 19 (3). pp. 463-471. ISSN 1394-2506

  • palm oil mill effluent tertiary treatment using ferrous sulphate

    PALM OIL MILL EFFLUENT TERTIARY TREATMENT USING FERROUS SULPHATE

    2.1 Palm Oil Mill Effluent 10 2.2 POME Generation in Malaysia 14 2.3 Physicochemical Characteristics of POME 16 2.4 Regulatory Control of Effluent Discharge 19 2.5 POME Treatment in Malaysia 22 2.5.1 Pretreatment of POME 22 2.5.2 Primary Treatment or Biological POME Treatment 23 2.5.3 Post-treatment 25

  • vwhp - iopscience.iop.org

    VWHP - iopscience.iop.org

    discharge palm oil mill effluent (POME) [2]. From the biomass mentioned above, POME is the most expensive and difficult waste to manage since it is generated in large volume in tonnes at a time [3]. POME is considered among the harmful waste that giving the detrimental impact to the environment if it is discharged untreatable [2,4].

  • reclamation from palm oil mill effluent using an integrated

    Reclamation from palm oil mill effluent using an integrated

    This research emphasizes eloquently on membrane technology for treatment of palm oil mill effluent (POME) as it is the Malaysia’s largest and most important agro based industry. Findings established significant quality improvement with an efficient recovery of water from palm oil mill via innovative membrane application.

  • treatment of palm oil mill effluent using combination of

    TREATMENT OF PALM OIL MILL EFFLUENT USING COMBINATION OF

    3.2.2 Palm Oil Mill Effluent (POME) 30 3.3 Analytic Methods 31 3.3.1 Mixed Liquor Suspended Solid (MLSS) and Mixed Liquor Volatile Suspended Solid (MLVSS) 31 3.3.2 Chemical Oxygen Demand (COD) 31 3.3.3 Polysaccharide 32 3.3.4 Particle Size Analysis 32

  • assessment of the effluent polishing plant using a

    ASSESSMENT OF THE EFFLUENT POLISHING PLANT USING A

    USING A ULTRAFILTRATION MEMBRANE INSTALLED AT A PALM OIL MILL Palm oil mills discharge raw effluent with high biochemical oxy gen demand (BOD) of about 25 000 mg O2/dm3. Conventional effluent treatment system uses ponds with a long hydraulic retention time of about 55–85 days, but the reduction of BOD is usually halted at 100–2 50 mg O2/dm3

  • issn 2250-3153 palm oil mill effluent (pome) treatment

    ISSN 2250-3153 Palm Oil Mill Effluent (POME) Treatment

    Palm oil mill effluent (POME) is undoubtedly the largest waste generated from the oil extraction process (Yacob et al., 2006). According to Prasertsan and Prasertsan (1996), during processing in the palm oil mill more than 70% (by weight) of the processed fresh fruit bunch (FFB) was left over as oil palm waste.

You may like it